For those who have been disappointed in past trying to buy one of Inclinometers from Machine-Dro then good news.
They have 70 in stock as I type. Best order soon as I know from previous experience they sell out fast!
http://www.machine-dro.co.uk/angle-tilt-sensor-inclinometer-with-remote-dis…
Peter G4URT
Hi Microwaver,
I will be qrv 6cm this weekend:
Saturday from 03:00z until 15:00z with some breaks for “relaxing”
Sunday from 04:00z until 16:00z with some breaks.
System is up and runnig – good echos today. As Charlie pointed out: hopefully Murphy is on vacation ....
4.93 m prime focus dish / 120 watts at feed, 0,55 dB Nf, CP
vy 73 to everybody and good luck
Manfred, DL7YC
Hi all.
I plan to be QRV during my full Moon passes in the Dubus 6cm contest.
Hope to work you all! GL to everyone.
73 / Ingolf, SM6FHZ
--
Ingolf, SM6FHZ
http://www.2ingandlin.se/SM6FHZ.htm
Hello all,
VK3NX will be QRV during the WE for the 6cm Dubus contest. I will be on
as much as possible, Wx permitting.
Just installed the system and all OK...so hopefully Murphy keeps away!
I need about 10 degrees elevation on moonrise and can work down to almost 1
degree elevation on moon set....
Looking forward to working as many as possible!........... Please look for
me down here at the bottom of the earth!
73
Charlie
VK3NX
3.7m dish CP
100 W @ feed
QF21CT
I had gotten one of the GemRed units that is available on Amazon, but was unable to get the display in the shack. I was using 60' of cat5 cable. This appears to be the same unit as the Machine DRO. Any advice on getting a good signal into the shack?
JohnN4CNN
https://www.amazon.com/GemRed-Digital-Remote-Protractor-Without/dp/B00WQPHM…
