Hi All,
I'd like to inform that I was active in October part of the ARRL EME
Contest at single operator CW only category. I had 32 QSO's CW random with:
JH1KRC, YL2GD, SM7FWZ,I5MPK, G3LTF, SM4IVE, SM6FHZ, K2UYH, SM5DGX, WA6PY,
KL6M, WA9FWD, K2QM, W2BYP, K0PRT, G4RGK, DL6SH, F2CT, UA3PTW, OK2DL, F5KUG,
IK3MAC, DG5CST, DF3RU, SP7DCS, SP6JLW, OK1CS, SP6ITF, OK1CA, OK1KKD,
DL0SHF, G4CCH
Many thanks to all operators for amazing qso's. Special thanks to Mike
JH1KRC for patience... Heard a lot of other stations and hope to work them
in December part of the ARRL.It was my first parcitipation on 1296mhz EME.
By the last years my EME experienses involved me only around 432Mhz EME
with linear polarisation and homemade 8x23el. yagi set.After a lot of time
spend on garage/garden works and putting personal efforts I was at last
able to rise up my new dish (6.4m f/d=0.4) and take a chalange with EME in
next steps. The dish, tower and AZ/EL rotators, OE5JFL controller are my
homemade constructions. At now Im using RA3AQ feed and homemade G4DDK LNA.
Certainly my new EME system at start require a bit of optimisations. The
first measurements made at Sun SF=71 looks not bad, the SUN/CS = 17dB,
CS/GND=6,7dB. At follow link some further info about my EME dish
construction:
https://drive.google.com/drive/folders/1y7kbamQ6S-ULFED3GCKwpHeDUq1rfnvX?us…
In October part of the ARRL EME Contest I was active with PWR only 80W
still fading and fading, hour by hour. At sunday PWR dropped down to 60W or
even less. I haven't yet final solution for SSPA 1296Mhz but plann to
change it for next time. It will be my pleasure to see new stations in my
log at the next part of the ARRL EME Contest in December.
TNX 73 Raf SP9VFD
Hello all,
Due change of system i have for sale my dual rx system for 2m EME
Consists off
DUAL RX converter from HA1YA
AFEDRI dual channel SDR, AFE822x SDR-NET
Works great wit map65 as adaptive RX
Photo's and price on request
73 Lins PA3CMC 2m EME DXCC #30
EA5/PA3CMC ZS/PA3CMC Z21CMC 3DA0LB A21CMC
Member of Z21EME EME DX-pedition 2014Member of HV0A EME DX-pedition 2015
Member of 3DA0MB EME DX-pedition 2017
Member of A21EME EME DX-pedition 2019
Member of LX/PA3CMC & LX/PA3FYC EME DX-pedition 2020Member of<http://www.pa3cmc.nl><http://www.mmmonvhf.de><http://www.mmmonvhf.de>
<http://www.pa3cmc.nl>
Two geared synchros, with a combo 3" dial display (labelled for
polarization, another for Azimuth). Scientific Atlanta 78313. Contact me
for more information and pictures.
Pete K6TJ
Hello- For sale is a clean working Henry 2002A single 3CX800A7 amplifier. Pegs a 500 watt Bird slug with 25 watts drive. With original manual. Pick-up only in East Texas, will meet at nearby Hamfest possibly. Price is 900.00Thanks, Byron W5FH936-349-6353
LA 72A Lunar Link Amplifier and Power Supply, Pair of 3CPX800A7 Tubes
Includes optional Blower, PS Fan and Antenna Relay
Good Condition, I had D&C Electronics test the tubes
$3K plus freight (Freight approximately 300 by second day air to lower 48)
Send email off list for pictures and phone number if interested
--
KL7AM
Allen "Marty" Martin
4. Problem installing wsjtx-2.5.2-win64.exe (C. Lemmi - WD6Y)
5. Re: Problem installing wsjtx-2.5.2-win64.exe (Joe Taylor)It looks like WSJT-X is already running. You must exit the program
before installing an update.
-- Joe, K1JT
Thank you. The programs were not running on the desktop but Task Manager showed that WSJT-X was not responding. So I turned the PC OFF and ON again and then it loaded fine.I'm using IQ+ (yours!) and U-PHORIA UMC404HD which worked well in the past with previous versions.I've been working the past few months on mounting the LNAs on the antenna which was set up on the mast 2 days ago.
The programs were working in the past fine with ASIO UMC driver but now I only see "34 4 WDM-KS in 1-4 (IN 1-4)" which I assume is the new correct one to use.MAP65 do not open with the IQ+ ON. It flashes 3 blank white windows and goes out.
With IQ+ OFF it opens (and also says "Failed to start audio input stream" and "Fail to open Si500" which means the IQ+ is OFF, so I simply turn it ON).Then it turns apparently OK.When I click on 'decode' it flashes this error screen constantly every second or faster and I can only use Task Manager to turn the whole program OFF, no time to do any other adjustment. Similarly with WSJT-X and ECHO.===========================
Running: C:\WSJT\wsjtx\bin\m65 -s
At line 55 of file C:\Users\bill\src\k1jt\wsjtx\map65\libm65\q65b.f90
Fortran runtime error: Index '59313' of dimension 1 of array 'sync' outside of expected range (1:32768)
Error termination. Backtrace:
Could not print backtrace: libbacktrace could not find executable to open
#0 to #14 0xffffffff
===========================
Posting here because it's not an -rcx version.
73WD6Y(a)ARRL.NET
4. Problem installing wsjtx-2.5.2-win64.exe (C. Lemmi - WD6Y)
5. Re: Problem installing wsjtx-2.5.2-win64.exe (Joe Taylor)It looks like WSJT-X is already running. You must exit the program
before installing an update.
-- Joe, K1JT
While installing WSJT-X 2.5.2 (in C:\WSJT\wsjtx), I get these errors:
======================
Error opening file for writing
C:\WSJT\wsjtx\bin\Qt5Core.dll
C:\WSJT\wsjtx\bin\libfftw3f.dll
C:\WSJT\wsjtx\bin\libgrc_s_seh.dll
C:\WSJT\wsjtx\bin\libquadmath-O.dll
C:\WSJT\wsjtx\bin\libstdc+_-6.dll
C:\WSJT\wsjtx\bin\libwinpthread-1.dll
C:\WSJT\wsjtx\bin\m65.exe
Click Abort to stop installation,
Retry to try again, or
Ignore to skip this file.
Abort Retry Ignore
======================
Pressing 'Ignore' on these seven errors, the program installs (in C:\WSJT\wsjtx\bin\wsjtx,exe) but I don't now what is missing with those files not in the installation.I'm interested in MAP65 which opens apparently fine, but what am I missing with those files not installed?
What's the problem? I installed previous versions OK.
73
Carlos LemmiWD6Y(a)ARRL.NET
