Hi all,
I saw, that J. Biden is strongly pushing Washington, D.C to become
the 51st state of the union so maybe ARRL will add this state
at the WAS list in the near future. Could you tell me just for an info,
who is QRV EME from Washington DC on 2/70/23?
73
Matej, OK1TEH
PS: Congrats Gene for your 23cm DX trip, well done
Congratulations on your success! Very professionally done and much appreciated by all!
Thanks to you and your support team
Best 73 & Have a Safe Trip Home
Barry VE4MA
Dear Marko,
my friend Roland DL2OM is trying top reach you via email but apparently has
a bad email address.
Would you kindly contact him at dr.r.milker(a)milker.de
<mailto:dr.r.milker@milker.de> ?
vy 73 Bernd DF2ZC
<http://www.df2zc.de> www.df2zc.de
____________________________________________
144 MHz EME NewsLetter:
<http://www.df2zc.de/newsletter> www.df2zc.de/newslettertwitter.com/df2zc
144 MHz DXCC #21
144 MHz WAC
Kenwood TS 2000
2 x GU74b by LZ2US
BEKO HLV-2000
4 x 2M18XXX 21 dBd full elevation
I appreciate that this is a rather silly question, as there are numerous
possible answers. However, I'm sure I'll learn something from it!
I'm starting out on 10GHz EME. Planning on using a Kuhne G5 transverter.
There are actually two, related, questions:
1) Which IF to use
2) "Best" IF rig.
I'd mentioned before using my TS2000 as a 432MHz IF, but several people
pointed out the potential transmit "spike" problem, and indeed Kuhne advise
against the TS200. The TS2000 interfaces very well with WSJT-X, and I use it
at 144MHz for my 1296 transverter.
I could uses an IC7300, but there is no easy way of locking to a frequency
reference.
I also have an IC746, which is excellent for 144 EME.
On balance, I'm thinking of perhaps getting a separate rig just for 10GHz IF
use. It must be one that interfaces well with WSJT-X (for Doppler
correction, etc.)
Any thoughts greatly appreciated.
73
David, G4YTL
PS Supplementary question! Just in case a G4 transverter appeared on the
second-hand market, any great difference between it and the current G5?
Hello,
I will try to be active on 10 GHz EME the coming week end.
Only CW, and limited window (active both days, +/- 19z to 22z).
1.80m/28W/0.8dB
SN : 12dB
MN : 1dB
Will be on HB9Q logger.
73,
Hervé F5HRY
“Sooner or later, everything old is new again”
Stephen King (thinking about analog radio modes ...)
--
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
Where do I send WSJT-X feature suggestions?
A previous version of WSJT measured audio level with 0.1 dB resolution
which was nice for sun noise measurements.
Would it be useful if the audio level meter in WSJT-X have 0.1 dB
increments rather than 1.0 dB steps?
This assumes that this measurement is linear.
73 - Paul - W2HRO
Hello my EME friends,
9A9B will be on the Moon this weekend.
RIG: 4 x 12JXX2, MGF1302, 1 KW (ERPmax ? 55 KW), DSP, Spectran, ...
Hope to see you there - 144 MHz / CW !
73 de Branimir - 9A9B
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Hi,
I will be participating in the ARI EME contest upcoming weekend on 432 MHz.
If you are capable to do EME please look for me up or around 432.073 in JT65
or Q65 mode.
I look for CW stations too.
And I hope some of the North American stations will be there as well.
73, Peter PA2V