Hi Craig,
I have a collection of stuff here: http://alaska.net/~ptt/2c39/
Probably more in other places too. Let me know if you need more.
73 & GL
Mike, KL6M
> -------- Original Message --------
> Subject: [Moon-Net] schematic needed
> From: Craig via Moon-net <moon-net(a)mailman.pe1itr.com>
> Date: Thu, July 15, 2021 6:42 am
> To: <moon-net(a)mailman.pe1itr.com>
>
>
> Hello fellow Lunatics :
>
> Still having issues trying to get my 2C39 amps going. Homemade bias board I built 30 years ago has failed.
>
> Can’t locate the original circuit that possibly derived voltage from a 12VDC supply.
>
> Having that would really help trouble shoot it !
>
> But I do have on hand an alternative board, professionally built; but NO paperwork on that either. See attached picture.
>
> Anyone remember it ?
>
> Thanks,
> Craig, N8DJB/4<hr>_______________________________________________
> Moon-Net posting and subscription instructions are at http://www.nlsa.com/nets/moon-net-help.html
Not sure if the attachments will come through, if not please ask for photos
Hello all I have an IK3KGJ Phase shifter (noise canceller) for sale. I no longer need it because 2 yagis at just the right height gives me the required noise reduction.
If you have a lot of noise sources and a lot of reflections close by the effectiveness is reduced. If you have a fairly coherent noise source >80m distant it works extremely well. It can almost always remove birdies. In a situation where you have 2 stations one weak and one strong you can ALWAYS null out the strong local station.
You need a 2nd decent noise antenna, something like an 8 ele at 12m high. If you can accommodate that then the unit works very well.
I am asking 350 EUR plus shipping, the bare board is 380 EUR.
More info
https://iz3kgj.jimdofree.com/projects/144-mhz-phase-shifter-noise-cancel/https://www.i0jxx.com/gb/home/271-ll-ass-001.html
73
Conrad PA5Y
_._,_._,_
________________________________
Groups.io Links:
You receive all messages sent to this group.
View/Reply Online (#10869)<https://groups.io/g/UKVHFContesting/message/10869> | Reply To Group<mailto:UKVHFContesting@groups.io?subject=Re:%20%5BUKVHFContesting%5D%20For%20sale%20IK3KGJ%20phase%20shifter%20in%20enclosure> | Reply To Sender<mailto:g0ruz@g0ruz.com?subject=Private:%20Re:%20%5BUKVHFContesting%5D%20For%20sale%20IK3KGJ%20phase%20shifter%20in%20enclosure> | Mute This Topic<https://groups.io/mt/84246068/325161> | New Topic<https://groups.io/g/UKVHFContesting/post>
Your Subscription<https://groups.io/g/UKVHFContesting/editsub/325161> | Contact Group Owner<mailto:UKVHFContesting+owner@groups.io> | Unsubscribe<https://groups.io/g/UKVHFContesting/leave/1103978/325161/1612251387/xyzzy> [g0ruz(a)g0ruz.com]
_._,_._,_
HI All
Does anyone have DELTA 44 drivers for Windows 10/64 Bit?
It is even possible to use a DELTA 44 audio card in a WINDOWS 10 and Ryzen 7
processor.
Thanks in advance for the info.
73 de Milos, S52LM
Hello fellow Lunatics :
Still having issues trying to get my 2C39 amps going. Homemade bias board I built 30 years ago has failed.
Can’t locate the original circuit that possibly derived voltage from a 12VDC supply.
Having that would really help trouble shoot it !
But I do have on hand an alternative board, professionally built; but NO paperwork on that either. See attached picture.
Anyone remember it ?
Thanks,
Craig, N8DJB/4
Does anybody (preferably in UK/EU for convenience) have a spare WR90 low
power dummy load? I have a high power one, but need a small one just for
noise comparison measurements. For use at 10GHz.
73
David, G4YTL
a 12 foot dish is available in Massachusetts, USA.
three pieces, each 4+ feed wide, so can be transported
on a trailer
will be scrapped in two weeks if not claimed
contact Dan, KW2T, at dpedtke {at} gmail.com
73
paul W1GHZ
Help,
I have installed WSJT-X 2.50 / MAP65 3.0 .
WSJT-X appears to be working OK.
In MAP65 3.0 my 144.120 Mhz test signal appears on the MAP65 Widegraph
at about 144.144 Mhz.
In MAP65 2.7, I checked the parameter *"Initialize IQ+ on startup"**.
*This set the Frequency correction (ppm) to put my IQ+ on frequency.*
*
When I check the***"Initialize IQ+ on startup"**i*n the MAP65 3.0 setup
menu, MAP65 crashes and shuts down.
Changing *"InitIQplus=True"* to *"InitIQplus=Faulse"* in the MAP65.ini
file allows MAP65 to restart but rechecking *"Initialize IQ+ on startup"
*again caused MAP65 3.0 to shut down.
I am running Windows 7 Professional on my PC with an IQ+ and UADC4 and
have not had this problem with MAP65 2.,r8182. Any suggestion on how to
fix this are appreciated.
Please advise,
Ken -W8KEN
**
Joe WA8OGS and I will be QRV tomorrow morning at moonrise in Cincinnati. We set up today in the drizzle at the Voice Of America. We have a 2x2 array of 15 element LFA Yagi’s and 600 watts
We will be listening first on Q65-60B and then try an echo test. This is our first try with our portable 70 cm EME station.
Richard
WC8RK
Note new EMail “gkreute(a)gmail.xn--com-9o0a
Al, K2UYH, and Matej, OK1TEH, are working on the 432 and above EME Newsletter this weekend. Send all your news and any technical items and interesting pictures to alkatz(a)tcnj.edu
Previous NL can be found at http://www.nitehawk.com/rasmit/em70cm.html
73 and keep on keeping safe.
Peter, G3LTF
