if you've anything to contribute this month, please send to me at the usual
john at g4bao.com.
Full articles for Scatterpoint to Roger
editor at microwavers.org
FYI I also intercept that email address
73 and thanks
In the latest version of the WSJT-X the information in the
"Last TX" field (the lowest line of the main program window
on the left,) has disappeared. By default, it is set to Russian,
could this be the reason?
Arkady, UT9UR mailto:firstname.lastname@example.org
It's been brought to my attention that log submisssions for 2022 are significantly below 2021. The last date for submission is Dec 13 which is about 2 weeks. It seemed to me that activity on 23 cm was significantly above last year. In addition, there was a second weekend for 13 cm +. If you were active in the contest, please submit your logs to the ARRL. If we can get a good bump in entries, maybe we can get some of the contest software writers to add the EME contest to their suite of contest software and make it easier to create the Cabrillo logs the league needs. Thanks.SkipW1PV Sent from my Galaxy Tab® S2
Checking the list of submitted logs, there are only 137 to date. Last year we had 237 total log entries. If you need assistance in sending in the Cabrillo format log, I can assist. PLEASE submit your ARRL EME Contest logs in a timely manner. Logs due: 2359Z Dec 13, but, the sooner the better. Thanks, Rick K1DS
I have been playing with a new Triquint ULNA device (TQP3M9036). It
Shows a lot of promise. It is like a MAR or MSA device in that it is
50ohm in and out. and has a claimed NF about .4db nf ( their numbers).
I have built several pramps to test them and have gotten even better
than they claim and they cover 50-1296 with ease and NF is .4ish or
below. The S11 and S22 are both great and the OIP3 is +35db also
...very nice device. It has great promise as a good terrestrial LNA.
Preamps are foolproof to build and would cost under $50 if all the best
quality parts are used.
Just for information only ...
The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.
I tried *DF3CB's Fast Log Entry *program. It looks like it should be pretty
easy to enter a bunch of contacts.
I read the instructions and examples but there are a few issues. I would
really like to get this going.
mycall does not work. I have it in both the header and the log but it
leaves my call blank or if I load in the sample log first then do a new
file, and I set up with mycall in both places, then it shows that my call
is WB9ZZZ. I wonder if there is now a bug in the program?
jt65 is the only digital mode option and for the ARRL it should be DG. Also
the report is always -10 and nothing I do can edit that. It should be both
OOO. I initially had trouble entering time but after beating on it for a
while and basically repeating what I did earlier it finally entered a time
entry. My trials were the same as in the examples. I have read and re-read
the help file. Anyone have any ideas?
Here are the first three entries of my contest log in case someone is
willing to send me the entries in the proper format:
Oct 15, 2022
4:15 PA5Y OOO OOO
4:26 W9IP OOO OOO
4:34 UA5Y OOO OOO
I worked the strongest signals first and soon discovered that the wind had
blown my array 12 degrees off azimuth. With the array on the roof it was
easy to correct.
Earl Shaffer, WB9UWA
My EME array photos
Detailed array photos
G4RFR intends to be on 10,368.200MHz Saturday 3rd Dec, 17:00 - 22:00,
with the 12ft dish and 200W, vertical polarisation.
We will be on HB9Q.
Skeds can also be arranged via email.
Julian, G3YGF obo G4RFR
I'm going to sell my focus block on 3cm.
The block includes
1. 25 W PA based on CMPA801B025, SMA input, output, 28V 5A.
2. DL3BPC LNA WR90 NF 0.6 dB, 28db gain + WR-90 to WR-75 transition made by
PE1RKI. ( replaced month ago instead of DB6NT ).
3. WR-75 waveguide switch with a homemade controller with end position
4. Transverter DB6NT MKU 10 G3.
5. Homemade controller based on STM32 including sequencer, PA temperature,
and output power control, transferring data through RS485.
6. Integrated PSU MeanWell 28v, 15A.
7. Homemade aluminum box.
More photos of the block you can find here
Japan transverter and splitters were removed.
For more details please reply to my email at wsanotsock(a)gmail.com or write
on WhatsApp, Telegram, or Viber at +380969244791.