Getting ready for the next moon period, so I have downloaded and installed WSJT-X 2.4.0 and have it working with my 9100. Some questions about general operation now that it appears to be like FT8. So wondering how this is going to work. Are the plans to change to one call freq and then move for the contact or use the logger for this. In my case currently the software gives me an error when I move the dial and change frequency. It will tolerate a small movement but on 23cm from .060 to .070 I have to reset the radio interface. Scanning up and down for signals will be horrible maybe impossible. I suspect I am missing something in the setup as I cant find anyplace to change the JT65 mode to C or any others for that matter. Still reading the manual but some quick help may be nice. -- Bill Booth VE3NXK Sundridge ON, Canada 79.23.37 W x 45.46.18 N FN05ns Visit my weather WebCam at http://www.almaguin.com/wxcurrent/weather.html Organ and Tissue Donation - The Gift of Life Talk to your family. Your decision can make a difference.